PLA Straws for Hot and Cold Drink Bio PLA Straw is a new type of biodegradable environmental fiber-- lactic acid -- is made from a renewable natural material, lactic acid processing has the advantage of not using petroleum and other chemical materials and can be biodegradable from raw materials to wastes. PLA fiber is made of lactic acid made from starch and has biodegradability. After its waste is buried in the soil, the fiber can be completely decomposed into C02 and H20 in about 1-2 years under the action of microorganisms in the soil and water, thus degradation occurs. The carbon dioxide produced by it can be reduced in the atmosphere through the light and action of plants, which will not cause pollution to the earth's environment. Since this is a cycle, the experts called the PLA fiber "environmental recycling materials in the 21st century".
PLA Straws for Hot and Cold Drink Bio PLA Straw
Brand :N/A
Product origin :FUJIAN/GUANGZHOU
Delivery time :around 30days after order confirmed
Supply capacity :Good
PLA fiber is a new type of biodegradable environmental fiber-- lactic acid -- is made from a renewable natural material, lactic acid processing has the advantage of not using petroleum and other chemical materials and can be biodegradable from raw materials to wastes. PLA fiber is made of lactic acid made from starch and has biodegradability. After its waste is buried in the soil, the fiber can be completely decomposed into C02 and H20 in about 1-2 years under the action of microorganisms in the soil and water, thus degradation occurs. The carbon dioxide produced by it can be reduced in the atmosphere through the light and action of plants, which will not cause pollution to the earth's environment. Since this is a cycle, the experts called the PLA fiber "environmental recycling materials in the 21st century". The experts predicted that by the PLA polymer and fiber in the early years of the 21st century the expansion of production scale, with the loss of the lactic acid production raw material costs, the price will be to close to the development of PET fiber, its utility will rapidly expand, the economic benefit will gradually emerge.
PLA is a veritable "green environmental protection product" of synthetic organic polymer, so the outstanding advantage of PLA plastics is its green environmental protection.
First, its raw materials can be recycled, and the source of raw materials meets the requirements of sustainable development. PLA is made from corn, which can be continuously regenerated on earth, to produce lactic acid by fermentation, and then to produce ring-shaped dimer -propyl cross, which is polymerized. Therefore, the fiber made by PLA is also called corn fiber. In fact, all agricultural products containing starch and even common plants are available raw materials for PLA. Therefore, this advantage of PLA resin can overcome the limitations of petroleum and be comparable to that of recycled raw materials. Moreover, in terms of raw materials selection, it is more popular and easier to get than recycled materials which mainly use natural wood and cottonseed velvet as raw materials with high purity.
Secondly, PLA is non-toxic in the production process. Starch is extracted from crops, lactic acid is fermented and polylactic acid ester is further polymerized. All these processing processes can be non-toxic. In the production of chemical fiber in melt spinning, the PLA's low melting point, not only lower than that of polyester, nylon, is much lower than polypropylene also, generally around 170 ℃, its comprehensive energy consumption will be the current categories of chemical fiber products in the production of low, reduce the pollution of spinning, products can be again by soil and Marine biological metabolism, PLA fiber in the presence of biological effect of activated sludge, than in general are more likely to degrade in the soil, polluting the environment. In addition, PLA fiber is composed of starch. When it is burned, almost no nitric oxide is released, and no pollutants harmful to the environment, such as nitrogen and sulfur oxides, are produced. PLA fiber has no damage to air quality, so it is a "environment-friendly fiber" in a complete sense.
Third, green products require that they do not pollute the environment. No pollution is the requirement of green products. Petroleum chemical fiber is difficult to degrade itself in the natural world, and its large number of applications is the main reason of natural ecological problems caused by large amount of accumulation in nature. PLA is a biodegradable polymer, i.e. a resin that can be degraded into small molecules in the natural environment. Its degradation was first hydrolyzed by the c-0 bond on the primary bond, and then further degraded into C02 and H20 under the action of enzymes.
We right now offering all range of PLA straw in regular sizes and can do customized length as weel.
PLA straw is here to replace the plastic straw and will be a huge part of our daily life usage to protect our earth.
We also found the way to improve PLA material to become more stable for heat resistant up to 80-100°C。
